Ergon, Inc.
Ergon Asphalt & Emulsions, Inc. Parsons, TN
Facility Information
Facility Manager: Rusty Carrington
Facility Telephone: (731) 847-6351
Facility Fax: (731) 847-6351
Facility Address:5445 Highway 412 East Parsons, TN 38363-3641
Sales Manager: Tracy Cumby
Sales Telephone: (806) 549-5133
Sales Office Fax: (512) 469-9292
Sales Office Address:10506 Hartford Avenue
Lubbock,TX 79423
Need technical support?
Click here.
Available Products
Click Treatment
Description
Products
Tack Coat - Conventional
A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure.
SS-1
Chip Seal - Conventional
A spray-applied application of asphalt emulsion followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5 - 7 years are typical.
CRS-2, RS-2
Cold Mix - Conventional
Mixture of cutback asphalt or asphalt emulsion and aggregate, combined through a pugmill or asphalt plant and typically stored in a stockpile for use as temporary patching.
AE-3 Modified
Cold Mix - Premium
Laboratory designed mixture of an engineered asphalt or asphalt emulsion binder combined through an asphalt plant or pugmill that is capable of being stored in a stockpile for use as a durable repair of potholes, leveling and cold paving
RM-90 (ePatch)
Prime Coat - Conventional
An application of emulsion or asphalt binder to a soil base in preparation for the wearing course. Typical use is prior to a chip seal or hot mixed asphalt application; the prime provides protection of the soil against rainfall in staged construction and serves as a bond promoter for the eventual surface. Prime coats are also used as a curing seal for cement-treated bases.
AE-P
Click Treatment
Description
Products
Can’t find what you’re looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.
Facility Manager:
Rusty Carrington
Facility Telephone:(731) 847-6351
Facility Fax:(731) 847-6351
Facility Address:5445 Highway 412 East Parsons, TN 38363-3641
Sales Manager:
Tracy Cumby
Sales Telephone:(806) 549-5133
Sales Office Fax:(512) 469-9292
Sales Office Address:10506 Hartford Avenue
Lubbock,TX 79423
Need technical support?
Click here.
Available Products
| Click Treatment | Description | Products |
|---|---|---|
| Tack Coat - Conventional | A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure. | SS-1 |
| Chip Seal - Conventional | A spray-applied application of asphalt emulsion followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5 - 7 years are typical. | CRS-2, RS-2 |
| Cold Mix - Conventional | Mixture of cutback asphalt or asphalt emulsion and aggregate, combined through a pugmill or asphalt plant and typically stored in a stockpile for use as temporary patching. | AE-3 Modified |
| Cold Mix - Premium | Laboratory designed mixture of an engineered asphalt or asphalt emulsion binder combined through an asphalt plant or pugmill that is capable of being stored in a stockpile for use as a durable repair of potholes, leveling and cold paving | RM-90 (ePatch) |
| Prime Coat - Conventional | An application of emulsion or asphalt binder to a soil base in preparation for the wearing course. Typical use is prior to a chip seal or hot mixed asphalt application; the prime provides protection of the soil against rainfall in staged construction and serves as a bond promoter for the eventual surface. Prime coats are also used as a curing seal for cement-treated bases. | AE-P |
| Click Treatment | Description | Products |
Can’t find what you’re looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.